Computex 2008:我又來了,毅威。也順帶聊聊iWap消費性充電器


前一篇提到過,昨天實在是不小心的一天,感謝毅威的緊急充電站,讓筆者相機的電池得以充50%的電力,來繼續使用。但很遺憾的,想不到跑到快結束時,我的相機又沒電了,50%電力這麼不中用嗎?不知道是不是我的電池快不行了。於是乎,我又去毅威那邊,來緊急充電一下了。

緊急充電要十分鐘,好吧,總是要找些話題來聊聊,所以就聊到他們已經推出的消費型充電器,講了許多的優點,是不是這麼好,我不知道,不過我是買了一個回來就是了。特色如下:
一、相容性高:
市面只要談到3C產品的鋰電池,只要是3.6V(還有另一款還可以加上7.2V).幾乎都可以充。

二、夠方便:
可用AC電源充、可用三號電池充、而且一次最多可充三個。

三、還算簡單的操作介面:
不用辨識正負極,只要裝進去後,燈亮正常,就可以進行充電。

<Computex 2008: IWEI Technology, Revisited>
In the flat battery incident mentioned in earlier post, thanks for IWEI's emergency charging station, I got 50% of battery capacity to help me through the afternoon. Unfortunately, the battery ran flat again towards the end of the day, so I returned to IWEI for a top-up. While charging the battery, we talked about their iWap charger for general consumers, here are the features:

  1. High compatibility – can charge almost any 3.6V batteries used in current 3C (consumer, computing, communication) electronics products. A 3.6V/7.2V version is also available.

  2. Convenient – can draw power from AC power supply, AA batteries. Up to three batteries can be charged simultaneously.

  3. Easy-to-Use – the device is equipped with automatic polarity detection which detects correct polarity to charge.


雖然廠商說一次可充三台,但現場是一次充兩台,在機內的是我手機電池,而連接出來的是充另一支手機。本來無法理解為何可以充三台,後來看到選購配件,終於知道為何可以了,原來是有個手機轉接線配件。當這接線連出去時,又分開為兩個接頭,等於一次可以充兩支手機(因轉接頭中,有一個是mini usb,所以也可以接mini usb接頭的電器產品)
Above: charging two batteries simultaneously. One battery in charging compartment, the other one is charged though phone connection cable. There is an optional connection cable which can charge two mobile phones, or one mobile phone and one mini-USB device.



也可以當供電器使用,不過,僅限於USB接頭產品就是了,現場以LED燈示範。

Above: iWap can also function as power adaptor for USB-powered devices, as shown here with a USB LED lamp.

雖然設計理念很好,但不知好不好用,所以個人在現場也有買下,之後有機會的話,再跟各位談談個人的試用心得。